Electrostatic charging systems are used to generate a temporary bond between 2 surfaces.
This bond is sufficient to hold the surfaces together for a short period of time and is used in a variety of industries. Some examples are given below.
Chill Roll
Laminating
IML Bottles
Coating
Edge Pinning
Ribbon Tracking
Reel Changeover
Blocking
IONtacker fusion
Our latest generation of high efficiency static charging system.
The high voltage power supply is integrated into the charging bar.
Especially suitable for applications where an external high voltage supply and cable can problematic.
Also especially suited to applications where the charging bar needs to be positioned inside a turret as the system can be powered through 24V slip rings.
Fully adjustable 0-20KV – 30Watt
Current- or voltage constant
Positive or negative output voltage
24V DC supply voltage
10mm emitter pin pitch for highest charging field homogeneity
Emitter pin material made of Tungsten to achieve longest possible pin life time
Local or external control 0-10V. Voltage and current monitor signal
Resistant against most common cleaning and solvent agents
Rigid glass fibre enforced electrode body
IONtacker remote
Flexible, cost effective charging system for a wide range of applications.
Smallest possible electrode profile dimensions.
Fits to all Hildebrand charging electrodes.
Especially suitable for applications where simple charging is required.
Fully adjustable 0-20/25/30KV – 30Watt
Current – or voltage constant
Positive or negative output voltage
10mm emitter pin pitch for highest charging field homogeneity
Emitter pin material made of Tungsten to achieve longest possible pin life time
Local or external control 0-10V. Voltage and current monitor signal
Resistant against most common cleaning and solvent agents.
Rigid glass fibre enforced electrode body
IONtacker dual
Same specification as IONtacker remote.
Especially suitable for applications where both polarities are needed at the same time.
- Positive and negative output voltage integrated in same generator enclosure
IONtacker
Standard industrial charging system for a wide range of different applications.
Smallest possible electrode profile dimensions.
Fits to all Hildebrand charging electrodes.
Especially suitable for applications where local display of output voltage and current is important.
Fully adjustable 0-20/25/30KV – 30/60Watt
Current – or voltage constant
Positive or negative output voltage
10mm emitter pin pitch for highest charging field homogeneity
Emitter pin material made of Tungsten to achieve longest possible pin life time
Local control, Voltage and current monitor display
Resistant against most common cleaning and solvent agents
Rigid glass fibre enforced electrode body
Static charging static pinning edge pinning constant current constant voltage electrostatic charging static generator