C3 AN / C3 AG & C3 SN / C3 SG

Available in either aluminium or steel. Suitable for use with core inside diameters of: 25, 30, 40, 45, 50, 70 & 76.2 mm (3″). Manufactured with 3 nylon or 3 rubber gripping strips.

C3 SNL / C3 SGL

Ultra light steel air shaft. Suitable for use with 70 mm or 76.2mm (3″) id cores. Manufactured with 3 gripping strips. The most important feature of this type of shaft is the reduced manual handling weight. We aim not to exceed 25Kg (subject to application) whilst still maintaining a high load carrying capacity,

A cost effective alternative to carbon fibre.

C5 AG – Slit reels

Suitable for 3” (76.2mm) id cores. For use on rewind applications when slitting. Manufactured with 5 strips, made from ATEM patented printed rubber, for gripping.

C6 AG 3+3 / C6SG 3+3 – Slit reels

Available in either aluminium alloy or steel. Suitable for rewind applications when slitting. Suitable for use with 70mm or 3” (76,2mm) id cores. Can be supplied with either 3 aluminium strips for centring and 3 rubber strips for gripping or 6 rubber strips for gripping.

C6 ANGJ Extra long airchuck

Suitable for use with 4″ (100 mm), 5″ (127 mm) or 6″ (152.4 mm) id cores. Manufactured with 6 rubber strips for gripping. This extra long airchuck is designed to quickly fit over an existing shaft in the machine. Used where regular changes are necessary between core sizes but where it is difficult to remove the base shaft i.e. heavy cantilevered rewind shafts on a slitter rewinder.

C6 ANGJ 3+3

Suitable for use with 4″ (100 mm), 5″ (127 mm) or 6″ (152.4 mm) id cores. Manufactured with 3 nylon strips for centring and 3 rubber strips for gripping.

C6 ANGJL 3+3 – Lightened airshaft. Saves 4-5 KG weight over a C6 ANGJ 3+3

Suitable for use with 4″ (100 mm), 5″ (127 mm) or 6″ (152.4 mm) id cores. Manufactured with 3 nylon strips for centring and 3 rubber strips for gripping.

reel handling devices

C8 ANGJ 4+4

Suitable for use with 200 mm and 8″ (203.2mm) id cores. Manufactured with 4 nylon strips for centring and 4 rubber strips for gripping.

C10 ANGJ 5+5

Suitable for use with 10″ (250 mm) or 12″ (300mm) id cores. Manufactured with 5 nylon strips for centring and 5 rubber strips for gripping.